D-XXH rubber double-sided tooth synchronous belt introduction
The body layer of D-XXH rubber double-sided tooth synchronous belt is made of high-quality neoprene material imported from Japan, the skeleton layer is made of high-quality glass fiber rope imported from Japan, and the wear-resistant layer of tooth surface is protected by nylon 66 high-tensile cloth. D-XXH rubber double-sided tooth synchronous belt has the characteristics of good dynamic bending, good cracking resistance, excellent ozone performance, aging resistance, heat resistance, oil resistance, wear resistance and so on.
Precautions for storage, installation and use of D-XXH rubber double-sided tooth synchronous belt
1, it is strictly prohibited to forcibly break and bend the D-XXH rubber double-sided tooth synchronous belt to avoid damage to the strong layer and lose the use value.
2, The D-XXH rubber double-sided tooth synchronization belt shall not be stored in an abnormal bending state for a long time.
3, the D-XXH rubber double-sided tooth synchronous belt should be kept in a cool place.
4, please shorten the center distance during installation, relax the tension wheel, do not force the belt from the lower flange of the belt wheel hard drag grinding into.
5, The teeth of the D-XXH rubber double-sided synchronous belt must be at right angles to the running direction of the synchronous belt wheel.
6, the parallelism of the main shaft of the driving wheel and the passive wheel is controlled at tangent =1/1000 or so. The inaccurate axis position directly affects the service life.
7, It is found that the D-XXH rubber double-sided tooth synchronization belt on the driving wheel is skewed to one side, and the passive wheel should be moved to adjust it and the pressure of the tension wheel should be adjusted.
8, when starting, the center distance changes, D-XXH rubber double-sided tooth synchronization belt is relaxed, the phenomenon of jumping teeth, should check whether the pulley frame is loose, the positioning of the shaft is out of alignment. Adjust and reinforce.
9, D-XXH rubber double-sided tooth synchronous belt installation must be according to different models and bandwidth appropriate tension.
10, The tension wheel must be installed on the loose side of the driven transmission.
D-XXH rubber double-sided tooth synchronous belt transmission features
D-XXH rubber double-sided tooth synchronous belt is mainly used for double-sided transmission, with synchronous, simultaneous, double efficiency characteristics. When a strip drive is required and the direction is opposite, the installation position is required to be particularly compact, or other transmission requirements are high in the main drive and auxiliary drive linkage
