T10 rubber open synchronous belt body is made of imported high quality synthetic neoprene rubber, and mixed with a variety of different uses of rubber accessories; The skeleton material is imported high quality glass fiber rope; The tooth surface is protected by nylon 66 high tensile cloth.
T10 rubber open synchronous belt and T10 rubber synchronous belt transmission performance is similar, can be widely used in textile, light industry, chemical industry, machine tools and other general machinery for power transmission, suitable for multi-axis transmission. Customers can flexibly cut the length according to actual needs.
The type and specification of T10 rubber open synchronous belt are the same as that of T10 rubber single tooth synchronous belt, which is cut by spiral shape of large size mold.
T10 Rubber open synchronous belt application range
The performance of the door machine system (automatic door, automatic curtain machine) is suitable for linear reciprocating movement, and its positioning is accurate and its carrying capacity is large, which is the best choice for reciprocating positioning transmission
T10 Rubber open synchronous belt material
High quality rubber raw material, high strength glass fiber cord, high strength tooth surface cloth
Note when using T10 rubber open synchronization belt:
1, pay attention to the T10 rubber open synchronous belt surface clean, belt without distortion, full teeth.
2, T10 rubber open synchronous belt products should be strictly prohibited to bend, so as not to damage the skeleton material, affecting the strength of the belt.
3, T10 rubber open synchronous belt must not scratch the belt, so as to avoid early damage to the belt. T10 Rubber open timing belt to avoid contact with chemicals (especially strong oxidizing acids, such as concentrated sulfuric acid, etc.).
4, T10 rubber open synchronous belt try to avoid long-term contact with oil and water.
5, When replacing the T10 rubber opening synchronization belt, the tension of the belt must be reduced to a minimum before it can be taken out. It is strictly prohibited to use non-professional tools to pry down the T10 rubber opening synchronization belt in the case of high tension.
T10 Rubber open synchronous belt connection method:
Generally, the method of T10 synchronous belt tooth plate is used to fix and connect.
