PM polyurethane multi-wedge belt combines the advantages of plane and V-belt, both soft and strong characteristics of flat surface belt, but also has the advantages of compact and efficient V-belt.
The raw materials used for PM polyurethane multi-wedge belt are high-quality polyurethane materials, Kevlar wire, etc. The PM polyurethane multi-wedge belt produced by Longyun can not only be matched to the domestic PM multi-wedge belt wheel, in line with international standards, but also replace the imported PM polyurethane multi-wedge belt.
PM polyurethane multi-wedge belt has the advantages of both V-belt and flat belt. It has the characteristics of soft and strong flat belt, and has the advantages of compact and efficient V-belt. Its main features are as follows:
1. The transmission power is large, and the transmission power is 30% higher than that of the ordinary V-belt at the same time.
2. The transmission system is compact, and the space occupied by the transmission device is 25% less than that of the ordinary V-belt under the same transmission power.
3. The belt body is thin, full of flexibility, suitable for the transmission of small belt wheel diameter, but also suitable for high-speed transmission, the belt speed can reach 40m/s; Small vibration, less heat, smooth operation.
4. Heat resistance, oil resistance, wear resistance, small elongation, long life.
PM polyurethane multi-wedge tape has the following properties:
Mechanical properties: stable size, low pretension, low noise, high wear resistance, no maintenance, good elasticity, linear speed up to 80 m/s
Chemical properties: anti-aging, waterproof solution, anti-ultraviolet UVA, anti-ozone, highly anti-oil, anti-oil ester, anti-corrosion of most acids and alkalis
Operating temperature: -30℃ ~ +80℃ can withstand up to +110℃ for a short time
